Turn on the computer and tap the F2 key several times until you see the One Time Boot Menu. Select Diagnostics and press Enter . Follow the on-screen instructions to complete the preboot-diagnostic test. If the tests pass, the hard drive is working correctly.
Why is my HDD not being detected in BIOS?
The BIOS will not detect a hard disk if the data cable is damaged or the connection is incorrect. Serial ATA cables, in particular, can sometimes fall out of their connection. Be sure to check your SATA cables are tightly connected to the SATA port connection.
Why is my motherboard not detecting my hard drive?
Why is my hard drive not detected in BIOS? Among the many reasons for this issue, the most common cause is usually a damaged data cable or an incorrect connection. This is extremely common with serial ATA cables but you can test this out pretty easily by simply replacing it with another cable.
How do I tell which hard drive is booting?
All replies. You can open up disk management with diskmgmt. msc and under the Status column look for the disk that has “Boot” in it.
What is SATA mode in BIOS?
Serial Advanced Technology Attachment, also known as Serial ATA or SATA, enables mass storage devices, such as hard drives and optical drives, to communicate with the motherboard using a high-speed serial cable over two pairs of conductors.
How do you change SATA mode on Dell BIOS?
To view the SATA Settings screen, power on the system, press F2, and click System Setup Main Menu > System BIOS > SATA Settings. Table 1. SATA Settings details. Enables the embedded SATA option to be set to Off, AHCI mode , or RAID modes.
Where is SATA configuration in BIOS setup?
The user will need to check the “SATA Configuration” type in BIOS Setup Utility as shown below: Boot the system. Press F1 to enter into the BIOS Setup Utility. Choose the menu “Advanced -> SATA Configuration”.
How do I enable SSD in Dell BIOS?
Enter the BIOS by pressing F2 multiple times while the Dell Logo is shown. Go to Boot Sequence and set Boot List Option to UEFI. Go to SATA Operation and choose AHCI. In Advanced Boot Option, you click Enable Legacy Option ROMs.
How do I know if my hard drive is UEFI BIOS?
Check if you are using UEFI or BIOS on Windows On Windows, “System Information” in Start panel and under BIOS Mode, you can find the boot mode. If it says Legacy, your system has BIOS. If it says UEFI, well it’s UEFI.
How do I enable SATA ports in BIOS?
Make sure to configure the SATA controller mode correctly in system BIOS Setup. Step 1: Turn on your computer and press
How do I know if my hard drive is UEFI?
Click the Search icon on the Taskbar and type in msinfo32 , then press Enter. System Information window will open. Click on the System Summary item. Then locate BIOS Mode and check the type of BIOS, Legacy or UEFI.
How do I enable SATA controller in BIOS?
From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > SATA Controller Options > Embedded SATA Configuration and press Enter. Ensure that you are using the correct ACHI or RAID system drivers for your SATA option. Select a setting and press Enter.
How do you reset a Dell hard drive?
Select the option “Change PC Settings” from the menu on the left-hand side. Click on “Update & Recovery” and then on “Recovery”. Then select “Get started” under the heading “Remove everything and reinstall Windows”. The operating system will now be automatically reset to its factory settings.
What is the Windows boot manager in BIOS?
The Windows Boot Manager is a Microsoft-provided UEFI application that sets up the boot environment. Inside the boot environment, individual boot applications started by the Boot Manager provide functionality for all customer-facing scenarios before the device boots.
What is boot priority BIOS?
The boot order is a priority list. For example, if USB drive is above hard drive in your boot order, the computer will try the USB drive, and if it is not connected or no operating system is present, boot from the hard drive.
How do I add a hard drive to my Dell UEFI boot option?
From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Boot Options > Advanced UEFI Boot Maintenance > Add Boot Option and press Enter. Browse for an . EFI application from the list and press Enter.
Why is my boot option not available in BIOS?
If the boot sequence does not show up, select legacy BIOS mode and try to install Windows. Then select UEFI BIOS mode, and check the boot sequence. Reset the BIOS (press F9 to load defaults, press F10 to save and exit). If the hard disk is not recognized, try cleaning the disk.
Why is my SATA drive not detected?
The BIOS will not detect a hard drive if the data cable is faulty. Make sure the SATA cables are in good condition, and you have connected them promptly. Also, inspect the motherboard for bent or misaligned pins. Check your hard drive manufacturer’s documentation for the right type of cables.
What is UEFI boot mode?
UEFI Mode (default)—Configures the system to boot to a UEFI compatible operating system. Legacy BIOS Mode—Configures the system to boot to a traditional operating system in Legacy BIOS compatibility mode.
What does AHCI mean in BIOS?
Advanced Host Controller Interface, or AHCI, is a technical standard for an interface that enables software to communicate with Serial ATA (SATA) devices. These peripheral component interconnect (PCI)-class devices move data between system memory and SATA storage media.
Which SATA mode should I use?
If you are installing a single SATA hard drive, it is best to use the lowest numbered port on the motherboard (SATA0 or SATA1). Then use the other ports for optical drives.
What is the difference between SATA ATA and AHCI?
The main difference between AHCI and ATA is that ATA is the host controller and AHCI is the controller interface that was designed for SATA or Serial ATA which is an updated version of ATA.
