How do I manually select boot device?

Hold the Shift key and restart the PC. You should get the Windows 10 boot options screen. One of the choices is “Choose another operating system” which should allow you to pick a different installation of Windows.

How do I get to the boot selection menu?

The Advanced Boot Options screen lets you start Windows in advanced troubleshooting modes. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.

How do I fix the selected boot device is not available?

Restart the Computer and Attempt to Boot Normally. To restart the computer and attempt to boot normally, perform the following steps: Hold the and keys at the same time and press the key. The system restarts. Do not press any keys while the system is booting.

How do I force a USB to boot without BIOS?

If USB boot is disabled there is no way to boot from it without entering the bios. If you don’t have the bios password you have to contact the support of the manufacturer of the laptop, they should be able to help you.

Can I access BIOS without restarting?

Entering the BIOS requires you to restart your PC. Save your work and shut down other programs before you continue with this method.

How do I enable the F12 boot menu?

Connect the USB flash drive to the computer. Turn on the computer and tap the F12 key several times, until you see One Time Boot menu. Use the arrow keys and select BIOS Flash Update (Figure 1). Figure 1: Selecting the BIOS Flash option on the F12 One Time Boot menu.

How do I reset my BIOS to default?

Resetting the BIOS Once you’re in BIOS, you can try to hit either the F9 or F5 keys to bring up the Load Default Options prompt. Clicking Yes will be enough to restore the default settings. This key may be different depending on your BIOS, but it’ll usually be listed at the bottom of the screen.

Which key is for Boot Menu?

How to enter the Boot Menu. When a computer is starting up, the user can access the Boot Menu by pressing one of several keyboard keys. Common keys for accessing the Boot Menu are Esc, F2, F10 or F12, depending on the manufacturer of the computer or motherboard.

What is the F12 Boot Menu?

The F12 Boot Menu allows you to choose which device that you would like to boot the computer’s Operating System from by pressing the F12 key during the computer’s Power On Self Test, or POST process. Some notebook and netbook models have the F12 Boot Menu disabled by default.

How do I boot my HP laptop from USB?

Press F9 to open the Boot Device Options menu. Use the up or down arrow key to select the USB flash drive, and then press Enter. note: If you cannot select the USB flash drive from the Boot Menu, disable Secure Boot and enable Legacy Mode in BIOS.

How do I set boot priority without BIOS?

Find the boot menu key. Restart your device and repeatedly press the ESC key to enter the boot menu. Select your preferred booting mode (USB flash drive or CD Rom) from the available options and wait for your computer to restart.

What is UEFI boot mode?

UEFI Mode (default)—Configures the system to boot to a UEFI compatible operating system. Legacy BIOS Mode—Configures the system to boot to a traditional operating system in Legacy BIOS compatibility mode.

How do I enable my hard drive in BIOS?

Restart PC and press F2 to enter BIOS; Enter Setup and check system documentation to see whether the not detected hard drive is turned Off in System Setup or not; If it’s Off, turn it ON in System Setup. Reboot PC to check out and find your hard drive now.

Where is the boot device priority set?

Set boot device priority 1. Power on the device and tap [Delete] key to enter BIOS settings menu→ Choose [SETTINGS]→ Select [Boot] →Set boot priority for your own device. 3. [Boot Option #1] is usually set as [UEFI HARD DISK] or [HARD DISK].]

What are the 3 common keys used to access the BIOS?

Common keys to enter the BIOS are F1, F2, F10, Delete, Esc, as well as key combinations like Ctrl + Alt + Esc or Ctrl + Alt + Delete, although those are more common on older machines. Also note that a key like F10 might actually launch something else, like the boot menu.

What key is BIOS setup?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

What does F10 do on startup?

In Windows 10, the old Advanced Boot Options menu is titled Startup Settings. If you press F10, you’ll see another menu with a single item that allows you to launch the Recovery Environment, which is what you access when you boot from a Recovery Drive.

How do I open boot manager?

On most computers, this can be accomplished by pressing the “F8” key as soon as your computer turns on. When the Windows Boot Manager menu opens, you can use the arrow keys to select an operating system or external boot source and then press “ENTER” to load it.

How do I boot my computer with F2?

Reboot the computer. Watch the screen closely. After you see the screen that prompts you to “Press any key to boot from CD”, begin pressing the F2 key at the top of your keyboard repeatedly. This will open the Automated System Recovery program.

How do I factory reset my computer with command prompt?

Go to the Start menu search bar, type in ‘command prompt,’ and run it as administrator. In the Command prompt, type systemreset –factoryreset. Select the Keep my files and Remove everything option. Finally, click on Reset to begin the process.

Which function key is reboot?

Use Ctrl + Alt + Delete.

How do I start win 10 in Safe Mode?

At the sign-in screen, hold the Shift key down while selecting Power > Restart. After the PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart. After the PC restarts, a list of options is shown. Select 4 or F4 to start your PC in Safe Mode.